公交车被CAO得合不拢腿,人人添人人澡人人澡人人人人

行業資訊

液體撒布車對于融雪的處理

來源：http://www.xintangt.com/ 日期：2021-08-24

液體融雪劑撒布的重要方法是通過灑水車或液體撒布機進行噴灑，但實際使用過程中碰到了諸多問題。

The important method of spreading liquid snow melting agent is to spray it by sprinkler or liquid spreader, but many problems are encountered in the actual use.

1.噴灑劑量無法準確控制。

1. The spraying dose cannot be accurately controlled.

2.由于路況復雜，車輛需要走走停停，司機需要頻繁開關噴灑，影響行車安全。

2. Due to the complex road conditions, vehicles need to stop and go, and the driver needs to switch and spray frequently, which affects the driving safety.

3.液體融雪劑使用時需配合一定比例的水，由于比重不同，在罐體之內易形成分層。

3. Liquid snow melting agent needs to be mixed with a certain proportion of water. Due to different specific gravity, it is easy to form stratification in the tank.
水泥撒布車出租

4.車速不斷變化導致噴灑不均勻。

4. The constant change of vehicle speed leads to uneven spraying.

針對這些疑難問題，我司與美國道格拉斯經合力研發出一款新型智能液體撒布設備---液體撒布車，具體解決方案如下。

To solve these difficult problems, our company and Douglas of the United States jointly developed a new intelligent liquid distribution equipment - liquid distributor. The specific solutions are as follows.

1.采用RoadMaster控制器+PWM閥，通過脈寬調制控制液壓馬達轉速達到準確控制噴灑劑量的目的。

1. Roadmaster controller + PWM valve is adopted to control the speed of hydraulic motor through pulse width modulation to accurately control the spraying dose.

2.采用GPS模塊輸出車速信號控制PWM閥的啟停。

2. Use GPS module to output vehicle speed signal to control the start and stop of PWM valve.

3.加裝一套內循環管路，將底層液體抽出從頂部注入進行循環。

3. Add a set of internal circulation pipeline to extract the bottom liquid and inject it from the top for circulation.

4.采用GPS模塊輸出車速信號通過RoadMaster控制器實時控制PWM閥開度實現定量噴灑。

4. GPS module is used to output vehicle speed signal, and the opening of PWM valve is controlled in real time by Roadmaster controller to realize quantitative spraying.

本文由水泥撒布車出租http://www.xintangt.com奉獻.更多有關的知識請點擊:真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is rented by cement spreader http://www.xintangt.com Dedication. For more relevant knowledge, please click: sincere attitude. Provide you with comprehensive service. More relevant knowledge will be offered to you one after another. Please look forward to it

上一條：冷再生機水穩層施工要注意什么？

下一條：冷再生機租賃里瀝青加溫罐的優點及加熱方法